• Mounting of CONN Card (PZ-M542/PZ-M557)
STEP 1: When using LTC0 or LTC2 connector to mount the PZ-M542/PZ-M557 card, take off
the PLATE from the PZ-M542/PZ-M557 card. Then, overturn the PLATE and secure it
to the card with screws.
When using LTC1 or LTC3 connector to mount the PZ-M542/PZ-M557 card, skip Step
1.
NOTE:
The PLATE and screws are attached to the PZ-M542/PZ-M557 card.
Figure 2-58 Connection of PZ-M542/PZ-M557 and PLATE
2
NEAX2000 IVS
Installation Procedure Manual
ND-70928 (E), Issue 3.0
PLATE
PZ-M542/PZ-M557
SCREW
CHAPTER 2 INSTALLATION
Digital Trunk Interface (DTI)
Page 151