CHAPTER 2 INSTALLATION
Installation for Remote Site
• Install the PZ-8PFTB card to the PIM according to the following steps:
(1) Mount the PZ-8PFTB card into the PFT slot of the PIM.
(2) Connect the champ connectors of 25-pair cables to the PFT0 and PFT1 connectors on the
PZ-8PFTB card as shown in
Figure
2-27.
Figure 2-17 Connection of 25-Pair Cable and PZ-8PFTB
PFT1 CONNECTOR
CHAMP CONNECTOR ATTACHED TO PZ-8PFTB
PZ-8PFTB
PFT0 CONNECTOR
25-PAIR CABLE
To MDF
(See (3) on
Page
44.)
2
NEAX2000 IVS
Remote PIM System Manual
Page 43
ND-70917 (E), Issue 1.0