Stationary Equipment (For North America/Australia); Fixed Equipment (For North America/Australia); Fixed Equipment (For Other Countries) - NEC NEAX2000 IVS2 Installation Manual
Integrated voice server
Hide thumbs
Also See for NEAX2000 IVS2:
- Installation manual (416 pages) ,
- General description manual (106 pages) ,
- Manual (106 pages)
Table of Contents
Advertisement
CHAPTER 2 INSTALLATION
Procedure
Stationary Equipment (For North America/Australia)
The equipment is placed on the BASE TRAY which is fixed on the floor, and is connected to
120V/240V AC Power Source using AC CORD-D cable.
For installation of Stationary Equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE TRAY
Fixed Equipment (For North America/Australia)
The equipment is fixed on the floor by BASE PLATE and anchor bolts, and is connected to AC
Power Distribution Board using installation cable.
For installation of this equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE PLATE
Fixed Equipment (For Other Countries)
The equipment is fixed on the floor by BASE PLATE and anchor bolts, and is connected to 120V/
240V AC Power Source using AC CORD-D cable.
For installation of this equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE PLATE
Page 56
- Using AC CORD-D
- Installation of PIM, For Stationary Equipment
- Using installation Cable
- Installation of PIM, For Fixed Equipment
- Using AC CORD- D
- Installation of PIM, For Fixed Equipment
NEAX2000 IVS
2
Installation Procedure Manual
ND-70928 (E), Issue 3.0
Advertisement
Table of Contents
Need help?
Do you have a question about the NEAX2000 IVS2 and is the answer not in the manual?