NEC NEAX2000 IVS2 Installation Manual page 79

CHAPTER 2 INSTALLATION
Precautions
Table 2-1 Procedure for Unplugging/Plugging Circuit Cards (Continued)
CIRCUIT CARD
• PN-CP15 (FP)
• PN-CP20 (MP)
• PN-AP00-A (DBM)
• PN-AP00-B (AP00)
• PN-AP01 (AP01)
• PN-BRTA (BRT)
• PN-2BRTC (BRT)
• PN-2BRTK (BRT)
• PN-24CCTA (CCT)
• PN-30CCTA (CCT)
• PN-CFTC (CFT)
• PN-DAIA (DAI)
• PN-DAIB (DAI)
• PN-DAIC (DAI)
• PN-DAID (DAI)
• PN-DAIE (DAI)
• PN-DAIF (DAI)
• PN-24DTA-C (DTI)
• PN-30DTC-A/
PN-30DTC-C (DTI)
• PN-IPTB (IPT)
• PN-24PRTA (PRT)
• PN-30PRTA (PRT)
• PN-PW00 (EXTPWR)
• PN-4RSTB (MFR)
• PN-4RSTC (CIR)
• PN-SC00 (CCH)
• PN-SC01 (DCH)
• PN-SC03 (ICH)
• PN-SC03-A (CSH/ICH)
• PZ-M542 (CONN)
• PZ-M557 (CONN)
• PZ-VM00/
PZ-VM00-M (VM00)
• PZ-VM01 (VM01)
Page 50
PROCEDURE
PLUG UNPLUG
(1) Power off (1) Power off
or MB
switch on
(2) Plug in (2) Unplug
(3) Power on (3) Power on
or MB
switch off
(1) Power off (1) Power off
or MB
switch on
(2) Plug in (2) Unplug
(3) Power on (3) Power on
or MB
switch off
These circuit cards must be
or MB plugged in or unplugged under
switch on Make Busy condition or power
off to prevent damage to the
card or other system circuitry.
These circuit cards must be
or MB plugged in or unplugged under
switch on Make Busy condition or power
off to prevent damage to the
card or other system circuitry.
NEAX2000 IVS
CONDITION
2
Installation Procedure Manual
ND-70928 (E), Issue 3.0