NEC NEAX2000 IVS2 Installation Manual page 389

CHAPTER 3 LAMP INDICATIONS AND SWITCH SETTINGS
PN-IPTB (IPT)
Lamp Indications
• PN-IPTB
LAMP
COLOR
NAME
RUN Green
BUSY Red
SUBOPE3 Green
SUBOPE2 Green
SUBOPE1 Green
SUBOPE0 Green
L3 –
L2 –
L1 Green
LYR Green
• PZ-M567
LAMP
COLOR
NAME
LINK Green
TXRX Green
COL Green
100M Green
Page 360
Flashes at 120 IPM while this card is operating normally.
ON: Even one line is busy
OFF: All lines are idle
Remains lit when Card No. 3 of PN-4VCTI is operating.
Remains lit when Card No. 2 of PN-4VCTI is operating.
Remains lit when Card No. 1 of PN-4VCTI is operating.
Remains lit when Card No. 0 of PN-4VCTI is operating.
Not used
Not used
Remains lit while the line can be used.
Remains lit when IP network is ready to use.
ON: Being connected to IP network.
OFF: Disconnected to IP network.
Remains lit when sending or receiving IP data.
Remains lit when detecting IP data collision.
ON: Ethernet is operating with 100 Mbps.
OFF: Ethernet is operating with 10 Mbps.
FUNCTION
FUNCTION
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 3.0