CHAPTER 1 GENERAL INFORMATION
Mounting Conditions of Circuit Card
(3) Mounting Application Processor Cards in PIM 0 for Backup CPU System
Use slots AP00 to AP10 to mount application processor cards in PIM 0.
AP10 slot (FP10 slot) on PIM 0 is not available for an application processor card if the
system is configured with three or more PIMs, as this slot is used to mount the FP card for
that configuration.
Figure 1-12 Application Processor Card Mounting Slots (Backup CPU)
AC/DC
PWR
PIM 0
(For
Backup
CPU)
DC/DC
PWR
*1 Application processor cards can be mounted in AP00 to AP09 slots.
*2 AP10 slot is available for an application processor card only when the system is
configured with two or less PIMs.
Page 38
*
LTC1
LTC0
BWB
FRONT
*
2
1
LTC2
NEAX2000 IVS
LTC3
2
Installation Procedure Manual
ND-70928 (E), Issue 3.0