1.2.4
Adjusting the Adjusters
1.2.5
Attaching the paper feed unit to the copy table
Rev. 11..0.0/03.01
With the wrench (1031-7809-01), adjust the
height of the adjusters (front and back) to
stabilize the unit on the floor.
The wrench is not enclosed.
Be sure to set the adjusters as specified. Failure
to set the adjusters correctly may cause the unit
to become unbalanced and fall, possibly resulting
in serious injuries.
1. Place the paper feed unit on top of the copy
table so that the rubber feet on the paper feed
unit are correctly aligned on the copy table.
I-7
Caution
Di251/Di351