Port Lacpmode; Port Lacpmode Enable All - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

port lacpmode

This command enables Link Aggregation Control Protocol (LACP) on a port.
Default enabled
Format
port lacpmode
Mode Interface Config
no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format
no port lacpmode
Mode Interface Config

port lacpmode enable all

This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format
port lacpmode enable all
Mode Global Config
no port lacpmode enable all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
no port lacpmode enable all
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-104