Show Vlan Brief - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Configured
Tagging

6.2.2 show vlan brief

This command displays a list of all configured VLANs.
Format
Modes
VLAN ID
VLAN Commands
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q stan-
dard.
Autodetect - Specifies to allow the port to be dynamically
registered in this VLAN via GVRP. The port will not partici-
pate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE
802.1Q standard.
Determines the configured degree of participation of this port
in this VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q stan-
dard.
Autodetect - Specifies to allow the port to be dynamically
registered in this VLAN via GVRP. The port will not partici-
pate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE
802.1Q standard.
Select the tagging behavior for this port in this VLAN.
Tagged - specifies to transmit traffic for this VLAN as tagged
frames.
Untagged - specifies to transmit traffic for this VLAN as
untagged frames.
show vlan brief
Privileged EXEC
User EXEC
There is a VLAN Identifier (vlanid) associated with each
VLAN. The range of the VLAN ID is 1 to 4094.
v1.0, March 2006
6-11