dC132 NVM Initialization
Refer to the relevant section:
•
NVM Initialization - Copier
•
NVM Initialization - Network (3635 only)
•
NVM Initialization - Fax Card
NVM Initialization - Copier
Purpose
To return the copier NVM settings to default. Refer to
Refer to the relevant section:
•
NVM Initialization - Copier Procedure (3635)
•
NVM Initialization - Copier Procedure (3550)
NVM Initialization - Copier Procedure (3635)
1.
Enter diagnostics,
GP 1 Diagnostics
2.
Select Diagnostic Routines.
3.
Select Copier Routines, then 132 NVM Initialization - Copier.
4.
Touch the appropriate button to select the NVM to be initialized and follow the screen
instructions. Refer to
Table
1, for the functions that are reset to default:
•
All Copier NVM
•
Machine Variable NVM
•
SA/KO Dust Off
•
System Counters Dust Off
5.
Switch off the machine, then switch on the machine.
Table 1 Copier NVM (3635)
All Copier
Copier file type Category
NVM
NVM System Usage Counter Y
NVM Fault Counter
Y
NVM Diag Counter
Y
NVM SAKO Setting
Y
NVM Fault Log
Y
NVM Configuration
Y
NVM Diagnostics
Y
NVM Debug
Y
NVM Mach Var
Y
NVM Mach Var Zero
Y
NVM Mach Var Registration
Y
NVM Mach Var Paper Path
Y
NVM Mach Var DADF
Y
NVM Mach Var Platen
Y
General Procedures/Information
dC132
dC131 NVM
Read/Write.
Entry.
System
Machine
SA/KO Dust
Counters
Variable NVM
Off
Dust Off
Y
Y
Y
Y
Y
Y
Y
Copier file type Category
NVM Auditron
NVM Crash Recovery
NVM Completed Job Log
NVM JBA Database
NVM JBA Config
NVM Auditron Config
NVM HFSI Counter
NVM Initialization - Copier Procedure (3550)
1.
Enter diagnostics,
GP 1 Diagnostics
2.
Select Machine Diagnostics and press the OK key.
3.
Select EDC Mode and press the OK key.
4.
Select DC132 NVM Initialization and press the OK key.
5.
Select Yes and press the OK key to confirm initialization of the NVM values. All NVM will
be reset to default.
NVM Initialization - Network (3635 only)
Purpose
To reset the network settings to default.
Procedure
1.
Enter diagnostics,
GP 1 Diagnostics
2.
Select Diagnostic Routines.
3.
Select Network Routines, 132 NVM Initialization - Network, then All Network NVM.
4.
Follow the screen instructions to reset the network settings.
5.
Switch off the machine, then switch on the machine.
NVM Initialization - Fax Card
Y
Purpose
Y
To return the fax card NVM settings to default. Refer to
Y
Refer to the relevant section:
•
NVM Initialization - Fax Card Procedure (3635)
•
NVM Initialization - Fax Procedure (3550)
NVM Initialization - Fax Card Procedure (3635)
1.
Enter diagnostics,
GP 1 Diagnostics
2.
Select Diagnostic Routines.
3.
Select Fax dC Routines, then 132 NVM initialisation.
4.
Touch the appropriate button to select the NVM to be initialized and follow the screen
instructions. Refer to
•
Kill All
•
All Fax Directories
April 2010
6-40
Table 1 Copier NVM (3635)
All Copier
Machine
SA/KO Dust
NVM
Variable NVM
Y
Y
Y
Y
Y
Y
Y
N
N
Entry.
Entry.
dC131 NVM
Entry.
Table
2, for the functions that are reset to default.
Phaser 3635MFP/WorkCentre 3550
System
Counters
Off
Dust Off
Y
Y
Y
N
N
Read/Write.