Dc132 Nvm Initialization - Xerox phaser 3635 Service Manual

Table 5 NVM chain 20
Location NVM Name NVM Description
20-810 Fax Transmis- Adjusts the fax transmis-
sion Level sion level
20-830 Auto Dial Time- Adjusts the auto dial tim-
out eout
20-840 FAX Batch Send Fax batch send enable
Enable
20-900 FAX Total Send Total of sent fax pages.
Counter
20-910 FAX Total Total of received fax
Receive Counter pages.
General Procedures and Information
dC131, dC132

dC132 NVM Initialization

Value Default
Refer to the relevant section:
0 to 15dBm 12
•
•
10 to 100 seconds 55
•
Off (0) 0
NVM Initialization - Copier
On (1)
0-0xffffffff 0 Purpose
To return the copier NVM settings to default. Refer to dC131.
0-0xffffffff 0
Procedure
1.
2.
3.
4.
5.
6-36
NVM Initialization - Copier
NVM Initialization - Network
NVM Initialization - Fax Card
Enter diagnostics, GP 1.
Select Diagnostic Routines.
Select Copier Routines, then 132 NVM Initialization - Copier.
Touch the appropriate button to select the NVM to be initialized and follow the screen
instructions. Refer to Table 1, for the functions that are reset to default:
• All Copier NVM
• Machine Variable NVM
• SA/KO Dust Off
• System Counters Dust Off
Switch off the machine, then switch on the machine.
Table 1 Copier NVM
All Copier
Copier file type Category NVM
NVM System Usage Counter Y
NVM Fault Counter Y
NVM Diag Counter Y
NVM SAKO Setting Y
NVM Fault Log Y
NVM Configuration Y
NVM Diagnostics Y
NVM Debug Y
NVM Mach Var Y
NVM Mach Var Zero Y
NVM Mach Var Registration Y
NVM Mach Var Paper Path Y
NVM Mach Var DADF Y
NVM Mach Var Platen Y
NVM Auditron Y
NVM Crash Recovery Y
NVM Completed Job Log Y
System
Machine SA/KO Dust Counters
Variable NVM Off Dust Off
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Draft 4
Phaser 3635MFP