Calibrations; Initializing Print Meter; Initializing Nvm (Nvram) - Xerox Phaser 6128MFP Service Manual

Adjustments and Calibrations

Calibrations

Initializing Print Meter

Initializing NVM (NVRAM)

6-6
This process initializes the Print Meter.
1. From the Control Panel, press the System button.
2. Press the Up Arrow or Down Arrow button to find Admin Menu. Press the OK
button.
3. Press the Up Arrow or Down Arrow button to find Maintenance Mode. Press
the OK button.
4. Press the Up Arrow or Down Arrow button to find Init PrintMeter. Press the
OK button.
5. Are you sure? message is displayed. Press the OK button to start the process.
6. Initialized message is displayed. The Maintenance Mode - Init PrintMeter
menu is displayed when the process is completed.
This process initializes the settings stored in the NVRAM except for the network
settings. The NVRAM is a non-volatile memory that stores the printer settings even
after the power is turned Off. After executing this function and restarting the
printer, all the menu parameters are reset to their default values.
1. From the Control Panel, press the System button.
2. Press the Up Arrow or Down Arrow button to find Admin Menu. Press the OK
button.
3. Press the Up Arrow or Down Arrow button to find Maintenance Mode. Press
the OK button.
4. Press the Up Arrow or Down Arrow button to find Initialize NVM. Press the
OK button.
5. Are you sure? message is displayed. Press the OK button to start the process.
6. Initializing... --> Initialized messages are displayed.
7. The Maintenance Mode - Initialize NVM menu is displayed when the process
is completed.
8. Turn the printer power Off and back On.
Phaser 6128MFP Service Manual