Pl 9.20 Xerographic Module And Short Paper Path Assembly (45-87 Ppm) - Xerox WC5632 Service Manual

PL 9.20 Xerographic Module and
Short Paper Path Assembly (45-87
ppm)
Item Part Description
1 122K02660 Erase lamp (REP 9.9)
2 – Xerographic module (see below for
variants, see also NOTE 1, NOTE 2
and NOTE 3)
– 113R00673 Sold (XE)
– 113R00674 Sold (USSG/XCL)
– 113R00672 Metered (USSG/XCL/XE)
3 – Short paper path assembly (REF:
PL 10.25 Item 1) (NOTE 1)
4 130E10510 Relative humidity sensor (Q09-
365)/Ambient temperature sensor
(Q09-375)
5 960K40570 Temperature sensor (Q09-370)
6 055E54960 Erase lamp support
7 – Xerographic module latch (P/O PL
9.20 Item 17) (REP 9.6)
8 – Transfer/Detack corotron (NOTE 1)
(ADJ 9.1)
9 113K03330 Transfer/Detack harness
10 802E87940 Pivot plate
11 – Latch spring (P/O PL 9.20 Item 17)
12 – Latch pin (P/O PL 9.20 Item 17)
13 – Latch plate (Not Spared)
14 031E11102 Developer paddle (REP 9.7)
15 809E69220 Spring
16 – Curly clip (Not Spared)
17 604K41120 Developer latch pin kit (REP 9.6)
18 – Bracket stabiliser (P/O PL 9.20 Item
19)
19 604K53940 XRU skids kit
20 – Stripper finger assembly (P/O PL
9.20 Item 19)
NOTE: 1. A transfer/detack corotron (PL 9.20 Item 8) is
supplied with the xerographic module.
NOTE: 2. For the charge scorotron and the charge scorotron
grid harnesses, refer to PL 4.17 or PL 4.12.
NOTE: 3. If a new Xerographic module has been installed,
perform ADJ 9.2.
WorkCentre 5687 Family
September 2008
5-59
Parts Lists
PL 9.20