Rep 8.3 Duplex Transport Assembly; Rep 8.5 Inverter Transport - Xerox DocuColor 1632 Service Manual

REP 8.3 Duplex Transport Assembly

Parts List on PL 2.7
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove Duplex Transport Assembly
a. Remove Clip and Left Upper Cover.
b. Loosen Screws and remove Duplex Transport Assembly.
Left Upper
Clip
Cover
Screws
(2)
Figure 1 Removing Duplex Transport Assembly
Replacement
Repairs and Adjustments
REP 8.3, REP 8.5
WARNING
(Figure 1).

REP 8.5 Inverter Transport

Parts List on PL 11.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Left Cover Assembly.
2. Remove Inverter Transport (Figure
a. Remove E-rings (2), Bearings (2), and Transport Shaft.
b. Remove Screws (2).
c. Remove Inverter Transport.
E-Ring and
Screw
Bearing
(1)
Transport
Shaft
Inverter
Transport
Screw
(1)
Figure 1 Removing Inverter Transport
6/02
4-66
WARNING
1).
E-Ring and
Bearing
Prelaunch Training/Review
DC1632/2240