Table 59 Status Of The Last Bluetooth® Firmware Update - WAGO 765-4203/0100-0000 Product Manual

Commissioning
The status of the last Bluetooth
Value
0
1
2
Activating the Bluetooth
Note
Never use the product in areas where operation of radio equipment is prohibited.
Never use the Bluetooth
ited. The module contains a Bluetooth
medical electronic equipment such as hearing aids and pacemakers. Disable the Blue-
®
tooth
Note
Only use the product with Bluetooth
country or region.
To enable the Bluetooth
the smartphone or tablet. Proceed as follows:
• A DM code appears in the "Information" section of the Bluetooth
the smartphone or tablet.
ð The smartphone or tablet then sends an optical sequence (flash code) to the de-
ð The light sensor registers this sequence. If the sequence is recognized as correct, the
Bluetooth
connection to the smartphone or tablet.
Starting a Bluetooth
Proceed as follows to start a Bluetooth
1. Click Update request.
ð A dialog appears for selecting the Bluetooth
2. Select the firmware file.
ð The Bluetooth
Performing a Reset
Proceed as follows to reset the Bluetooth
• Click Reset.
ð The Bluetooth
86 Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Status
Ready for operation
Firmware file is being checked
Firmware update is being performed
®
Interface Using the DM Code Displayed
®
interface in areas where operation of radio equipment is prohib-
interface in these cases.
®
interface, you must have the WAGO I/O Field app installed on
vice's integrated light sensor.
®
interface is enabled, and the product attempts to establish a Bluetooth
®
Firmware Update
®
firmware update starts.
®
firmware is reverted and restarts.
®
firmware update is indicated as follows:
Table 59: Status of the Last Bluetooth
®
radio transmitter that can impair the function of
®
if the product has an approval for the specific
®
firmware update:
®
firmware file.
®
firmware:
765-4203/0100-0000
®
Firmware Update
®
tab. Scan it with
®