Understanding Safety Signs - MacDon D65 Operator's Manual

1.8 Understanding Safety Signs

MD #113482
General hazard pertaining
and servicing
CAUTION
To avoid injury or death from improper or unsafe
machine operation:
• Read the operator's manual and follow all safety
instructions. If you do not have a manual, obtain one
from your Dealer.
• Do not allow untrained persons to operate the machine.
• Review safety instructions with all Operators every year.
• Ensure that all safety signs are installed and legible.
• Make certain everyone is clear of machine before
starting engine and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of moving parts.
• Disengage header drive, put transmission in Neutral,
and wait for all movement to stop before leaving
operator's position.
• Shut down the engine and remove the key from ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
• Engage safety props to prevent lowering of header or
reel before servicing in the raised position (refer to the
header operator's manual).
• Use slow moving vehicle emblem and flashing warning
lights when operating on roadways unless prohibited
by law.
MD #131391
Crushing hazard
DANGER
• Rest header on ground or engage safety props before
going under unit.
147725
SAFETY
to machine operation
15
Figure 1.24: MD #113482
Figure 1.25: MD #131391
Revision A