3. Position the upper drive cover (B) onto the reel drive
and lower cover (C) and secure with six bolts (A).
5.9.2 Adjusting Reel Drive Chain Tension
Loosening Drive Chain
1. Remove the drive cover, refer to
Cover, page
209.
2. Loosen six nuts (A). Slide the motor (B) and motor
mount (C) down towards the reel shaft.
147725
MAINTENANCE AND SERVICING
Figure 5.200: Drive Cover – Double Reel
Removing Drive
Figure 5.201: Single-Reel Drive Shown –
Double-Reel Drive Similar
Figure 5.202: Single-Reel Drive – Viewed from
Underside of Reel
211
Revision A