MacDon D65 Operator's Manual page 110

CAUTION
Stand clear of wheels and release linkage carefully as
wheels will drop once the mechanism is released.
1. Pull the handle (B) upwards to release and raise the
linkage (A) fully upwards into the vertical support.
2. Raise the header fully, stop the engine, and remove the
key from ignition. Engage the header safety props.
3. Remove the hair pin and clevis pin (A).
4. Pull the latch handle (B) to release the suspension
linkage (C), and pull the suspension linkage away from
the spindle (D).
5. Lower the wheels slowly.
6. Lower the handle (B) to lock.
147725
OPERATION
Figure 3.85: Raising Linkage
Figure 3.86: Left Front Wheels
Figure 3.87: Locking Linkage
96
Revision A