Installing Bushings On Five-, Six- Or Nine-Bat Reels - MacDon D65 Operator's Manual

17. Slide support (A) off of the bushing halves (B).
NOTE:
Two tine tubes have supports that are assembled
opposite to what is shown. Those supports (A)
can be rotated for the flange to clear the channels
before they can be moved off the bushing. The
tine tube can also be moved outward slightly.
18. Remove the bushing halves (B).

Installing Bushings on Five-, Six- or Nine-Bat Reels

WARNING
To avoid bodily injury from fall of raised reel, always engage reel safety props before going under raised
reel for any reason.
IMPORTANT:
Ensure tine tube is supported at all times to prevent damage to the tube or other components.
147725
MAINTENANCE AND SERVICING
Figure 5.170: Support
Figure 5.171: Opposite Support
199
Revision A