4. Remove the screws (A), tube connectors (B), and nuts
from the draper joint to uncouple the draper.
5. Pull the draper off the idler roller.
6. Remove the bolts (A) and washer at the ends of the
idler roller.
7. Spread the roller arms (B) and (C) and remove the
idler roller.
Replacing Draper Idler Roller Bearing
1. Remove the draper idler roller assembly. Refer to
Removing Draper Idler Roller, page
147725
MAINTENANCE AND SERVICING
Figure 5.116: Draper Connector
Figure 5.117: Idler Roller
174.
175
Revision A