Maintenance And Servicing; Preparing Machine For Servicing - MacDon D65 Operator's Manual

5 Maintenance and Servicing

The following instructions provide information about routine header service. Detailed maintenance and service
information is contained in the technical service manual that is available from your Dealer. A parts catalog is provided
in the plastic manuals case inside the left endshield.
Log hours of operation and use the maintenance record provided (refer to
page 115) to keep track of your scheduled maintenance.

5.1 Preparing Machine for Servicing

DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, always stop engine
and remove key before leaving the operator's seat, and always engage safety props before going under
the machine for any reason.
CAUTION
To avoid personal injury, perform the following procedures before servicing header or opening
drive covers:
1. Lower the header fully. If it is necessary to service the header in the raised position, always engage the
safety props.
2. Stop the engine and remove the key from the ignition.
3. Engage the park brake.
4. Wait for all moving parts to stop.
147725
5.3.1 Maintenance Schedule/Record,
111
Revision A