3.14.1 Removing Beater Bars
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
1. Lower the header to the ground, stop the engine, and
remove the key from the ignition.
2. Remove bolts (A) securing the beater bars (B) and
clamps (C) to the auger tubes, and remove the beater
bars and clamps.
147725
OPERATION
Figure 3.68: Single-Reel Headers
Figure 3.69: Beater Bars
86
Revision A