MacDon D65 Operator's Manual page 136

Figure 5.9: Every 250 Hours (Continued)
A - Rear Axle Pivots
C -Frame/Wheel Pivot (1 Place) - Both Sides
14. U-joint has an extended lubrication cross and bearing kit. Stop greasing when greasing becomes difficult or if
U-joint stops taking grease. Overgreasing will damage U-joint. Six to eight pumps are sufficient at first grease
(factory). Decrease grease interval as U-joint wears and requires more than six pumps.
147725
MAINTENANCE AND SERVICING
B - Front Wheel Pivot (1 Place)
D - Double Reel U-Joint (1 Place) 14
122
Revision A