Removing Endshields - MacDon D65 Operator's Manual

3. Push in the endshield to engage lower latch (A).
4. Use tool (B) to lock lower latch (A).
5. Replace tool (B) and lynch pin (A) on top pin (C).

Removing Endshields

1. Open the endshield. Refer to
page 35.
2. Remove the acorn nut (A) securing the endshield to
support (B).
3. Lift the endshield off support (B).
147725
OPERATION
Opening Endshields,
37
Figure 3.11: Left-Hand Endshield
Figure 3.12: Left-Hand Endshield Pin
Figure 3.13: Left-Hand Endshield
Revision A