Greasing Procedure - MacDon D65 Operator's Manual
Draper header for self-propelled windrowers
Hide thumbs
Also See for D65:
- Operator's manual (310 pages) ,
- Assembly instruction manual (110 pages) ,
- Installation instructions manual (74 pages)
Table of Contents
Advertisement
Greasing Procedure
Greasing points are marked on the machine by decals showing a grease gun and grease interval in hours of
operation. Master grease point location decals are provided on the header.
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
Refer to
5.2.1 Recommended Fluids and Lubricants, page
112
for recommended lubricants.
Log hours of operation and use the Maintenance Record
provided to keep a record of scheduled maintenance.
Refer to
5.3.1 Maintenance Schedule/Record, page
147725
MAINTENANCE AND SERVICING
115.
Figure 5.11: Greasing Interval Decal
Figure 5.12: FD75 Master Grease Point Decal
124
Revision A
Advertisement
Table of Contents
