MacDon D65 Operator's Manual page 218

Tine Tube Support (If installed) Bushings
20. Position bushing halves (B) on tine tube with flangeless
end adjacent to reel arm, and locate lug in each
bushing half in hole in tine tube.
21. Slide support (C) onto bushing (B). For the opposite
tine tube, rotate support (C) or slightly move tine tube
so that it clears channels (D).
22. Install bushing clamp (A) onto tine tube, adjacent to
flangeless end of bushing (B).
23. Position clamp (A) on bushings (B) so that edges
of clamp and bushing are flush when clamp fits into
groove on bushing and lock tabs are engaged.
147725
MAINTENANCE AND SERVICING
Figure 5.183: Support
Figure 5.184: Opposite Support
Figure 5.185: Bushing Clamp
204
Revision A