Disassembling The Re-Entrant Coupling Mechanism; Disassembling The Probe Contact Assembly - Waters Autospec Premier Operator's Manual

Disassembling the re-entrant coupling mechanism

To disassemble the re-entrant coupling mechanism
1. Slide the peg out of the mounting bracket.
2. Remove the two screws that secure the tee-block to the U-bracket.
3. Remove the nut that secures the peg to the U-bracket.
4. Remove the peg from the U-bracket.

Disassembling the probe contact assembly

Probe contact assembly components
A
7-56 Routine maintenance
C
D
H
B
G
D
D
E
F