The Tune Window Edit Menu; The Tune Window Ion Mode Menu - Waters Autospec Premier Operator's Manual

To create a new instrument parameter file
Click File > New.
To open an existing instrument parameter file
1. Click File > Open.
2. In the Open dialog box, select the required instrument parameter file
(.ipr).
3. Click OK.
To save an instrument parameter file
Click File > Save.
Tip: This option is available only if you make changes to Tune window
parameters after opening the instrument parameter file.
To save an instrument parameter file to a new file name
1. Click File > Save As.
2. In the Save As dialog box, enter a file name for the new instrument
parameter file.
3. Click OK.
To print a report of the current Tune window
1. Click File > Print.
2. In Print dialog box, click OK.

The Tune window Edit menu

To copy an image of the peak display to the clipboard:
Click Edit > Copy.

The Tune window Ion Mode menu

Use the Ion Mode menu to select the required ionization mode and update the
Tune window's Source tab to that mode.
The Tune window Edit menu D-3