Waters Autospec Premier Operator's Manual page 217

Key to inner source contact support assembly components (Continued)
Item Description
G Screw M1.6 × 8
H Washer
I Nut
To disassemble the inner source contact support assembly
To avoid damage, take great care when handling the inner
Caution:
source contact plate; it is very fragile.
1. Remove the nut, screw, washer and spacers that secure the trap contact
and connecting lead to the inner source contact support plate, and
separate these components.
2. Remove the trap contact and 2-mm spacers from the inner source
contact support plate.
3. Remove the nuts, screws, washers and spacers that secure the first
repeller contact and connecting lead to the inner source contact support
plate, and separate these components.
4. Repeat step 3
5. Remove the nut, screw, washer and spacers that secure the first
filament contact and connecting lead to the inner source contact support
plate, and separate these components.
6. Repeat step 5
Trap contact
Repeller contacts
Inner source contact support plate
Filament contacts
for the second repeller contact.
for the second filament contact.
Source maintenance 7-59