The Linked Scanning Tab - Waters Autospec Premier Operator's Manual

The Linked Scanning tab

The Linked Scanning tab appears in the Tune window when Linked
Note:
Scan mode is selected in the Control 2 tab.
Linked Scanning tab
Linked Scanning page parameters
Parameter
Field Settings pane
Magnet Mass
Accelerating V
ESA 1 Energy
ESA 2 Energy
* The Magnet Mass maximum value depends on the Magnet Limit setting in
the Instrument Setup dialog box.
** The maximum values for Accelerating V, ESA 1 Energy and ESA 2 Energy
depend on the Voltage Limit settings in the Instrument Setup dialog box.
Adjusting the Accelerating V slider automatically adjusts the ESA 1 Energy
and ESA 2 Energy sliders to the same setting. You are reminded of this by an
indicator that appears to the right-hand side of the sliders.
Minimum Maximum
Value Value
0.0 2300.0*
0.00 8000.00**
0.00 8000.00**
0.00 8000.00**
The Tune window instrument controls
Default
Value
0.0
8000.00
8000.00
8000.00
D-45