Waters Autospec Premier Operator's Manual page 81

2
B /E Scan function editor parameters (Continued)
Parameter
Pre-Acquisition
Calibration File
2
To set up an B /E Scan function:
1. In the MS method editor, click
Click Functions > B
Alternative:
2
2. In the B /E Scan function editor, enter the required parameters.
3. Click OK.
Description
Enter a pre-acquisition calibration file name and
path in the text box, or click Browse.
This file is used to calibrate the scan of ESA1 and
ESA2 performed by the B
it on standard Magnet Scan data, over exactly the
same magnet mass range and scan time as the B
scan.
2
/E Scan.
2
/E scan. You must create
.
Setting up scanning functions
2
/E
3-17