Disassembling The Sampling Cone Assembly - Waters Xevo G2 QTof Operator's, Overview And Maintenance Manual

Disassembling the sampling cone assembly

Required materials
• Chemical-resistant, powder-free gloves
• Combined 2.5-mm Allen wrench and cone extraction tool
To disassemble the sampling cone assembly:
Warning:
biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
1. Retrieve the combined 2.5-mm Allen wrench and cone extraction tool
from its storage location behind the source enclosure.
The sampling cone assembly can be contaminated with
Cleaning the sampling cone assembly
Combined 2.5-mm
Allen wrench and cone
extraction tool
TP03130
5-31