Vacuum Connections - Waters Autospec Premier Operator's Manual

– Source
– Analyzer
– Inlet 1
– Inlet 2

Vacuum connections

Warning:
to the fore pumps. If the exhaust is not correctly filtered,
environmental damage can occur.
Caution:
gas-ballasted before pumping.
See "Vacuum pump maintenance" on page 7-3
Vacuum connections
ANALYSER
Three vacuum connections are provided, for the Analyzer, Source, and Inlet 1
fore pumps.
To avoid toxic vapors, a suitable exhaust line must be fitted
Ensure that each rotary fore pump contains oil and has been
SOURCE
Controls and connections on the rear of the instrument
INLET 1
1-15