Waters Autospec Premier Operator's Manual page 304

Toolbar buttons (Continued)
Tool Equivalent menu item Function
Edit > Copy
Vacuum > Monitor
Options > Instrument
Setup
Options > Experiment
Calibration
Options > Linked
Scanning Utility
D-30 The MassLynx Tune window
Copies an image of the peak display onto
the clipboard.
Starts an acquisition.
Pauses the current acquisition. Click the
button again to restart the acquisition.
Stops the current acquisition.
Starts a tuning acquisition. Click the
button again to stop the tuning
acquisition.
Opens the Vacuum Monitor window,
which displays the Pirani and ionization
gauge outputs (in mbar) for the various
parts of the instrument.
Opens the Instrument Setup dialog box.
Opens the Experiment Calibration dialog
box. to perform an experiment calibration
for use with Voltage SIR, MRM, MIKES
and NRMS experiments.
Opens the Linked Scanning Utility dialog
box, to calculate ESA and Magnet Mass
values required to monitor specific
reactions in Linked Scanning mode.
Opens the AutoSpec AutoTune dialog box,
to start the AutoTune facility.
See "Using the AutoTune facility" on
page 2-19.