The Tune Window Peak Display; Customizing The Peak Display; Opening The Peak Display Menu - Waters Autospec Premier Operator's Manual

• NRMS – containing NRMS parameters only.
• MIKES/NRMS – containing both MIKES and NRMS parameters.
See "Configuring the magnet and MIKES and NMRS options" on page
MIKES/NRMS page
MIKES/NRMS page controls
Control
MIKES:
MIKES Slit
Voltage On
NRMS:
Voltage On

The Tune window peak display

Customizing the peak display

Opening the peak display menu

You can use the peak display menu to customize the peak display. Open it by
right-clicking in the peak display window in the Tune window.
Description
Sets the MIKES slit width.
Switches on the MIKES voltage.
Switches on the NRMS voltage.
The Tune window peak display
D-28.
D-47