Safety instructions Do not touch moving parts during operation! The user must never put their fingers or any objects on and around the moving platform. • The device must always be completely switched off (cables removed) before moving it. • The device must be handled with caution as it contains moving parts.
About this manual Read the user manual before using this device. Strictly follow usage and main- tenance instructions provided in the manual. It is the user’s responsibility to become familiar with all available information concerning the correct use, care and limitations of these products. If you are uncertain about the correct use or limitations of the products, contact Andrew Alliance service and support.
Getting started Before If you do not have a OneLab account, please create one by going to: you begin https://onelab.andrewalliance.com/signup Wait for the LED indicator to Plug your Shaker+ turn blue and blink. into a power source. The device will automatically start up. After a couple of mi- nutes, the Shaker+ will inform you when it is...
Page 5
Feel free to contact the Andrew Alliance support team Chat with our support team Send us an email to Call us directly in OneLab support@andrewalliance.com +41 22 518 0357 We reply within 1 business day Mon-Fri: 8:00 - 17:00 CET Operations Design your protocol 1.
Multiple connected devices Technical data installation Labware Check the OneLab Domino compatible Catalog at andrewalliance.com/ domino-catalog Mixing frequency • Tube: 200 to 2000 rpm • Microplate: 200 to 3000 rpm (The maximum speed may differ according to the type of used labware) Mixing orbit 2 mm...
Unit end of life When a unit reaches the end of its useful life, contact Andrew Alliance for directions and information on the end-of-life policy. This is in accordance with the European Union Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Certifications Electrical safety I.
Need help?
Do you have a question about the Andrew Alliance Shaker+ and is the answer not in the manual?
Questions and answers