Waters Autospec Premier Operator's Manual page 157

Probe Control dialog box's Control tab displays
Display
Ramps Display
Probe State
Time
Value
BP/TIC
To start the current probe ramping method
Click .
To stop the current probe ramping method
Click .
To pause the current probe ramping method
Click .
Description
Shows a graph of the current probe ramp against
time. Both the target value and actual value appear
to indicate how accurately the ramp profile is being
followed.
Displays the current state of the probe ramp.
Displays the current time, in minutes.
Displays the current ramp value, in units appropriate
to the probe type.
Displays the Base Peak or TIC intensity, as
appropriate.
Ramping the probe temperature 6-19