Tall Crop Dividers; Removing Tall Crop Divider - MacDon R85 Operator's Manual

6.11 Tall Crop Dividers

The tall crop dividers (one on each end of the header) assist in clean crop dividing and cutterbar entry in tall crops.
Tall crop dividers are not adjustable, but can be removed easily.

6.11.1 Removing Tall Crop Divider

DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even
a pet could engage an idling machine.
1. Lower header to the ground, shut down windrower, and
remove key.
2. Open cutterbar doors. Refer to Section
Doors, page 31.
3. Remove the four bolts (A) and nuts.
deflector (B).
169457
OPERATING THE HEADER
5.5 Cutterbar
Figure 6.32
Remove the
Figure 6.33
88
Rev. F