Installing Reel Drive Cover - MacDon FlexDraper FD2 Series Installation Instructions Manual

3.5 Installing Reel Drive Cover

The reel drive cover protects the drive components from weather and debris.
1. Position lower drive cover (B) onto the reel drive, and
secure with three bolts (A).
2. Position upper cover (A) onto the reel drive, and secure in
place using two clips (B) on the lower cover.
3. Rotate spring latch (A) down to secure the upper cover to
the reel drive. Ensure V-shaped loop (C) points down, and
the spring end remains inserted into back plate hole (B) on
both sides of the reel drive.
215318
INSTALLATION INSTRUCTIONS
Figure 3.12: Lower Drive Cover
Figure 3.13: Upper Drive Cover
Figure 3.14: Reel Drive
13
Revision B