CHAPTER 3
SHOWGUN® Menu System
Lamp State
LAMP STATE
The
option in the
Copying the Boot Code
When new software is uploaded to SHOWGUN fixtures, it may contain a new boot code which
must be copied to each fixture. This is apparent if the fixture displays a
CAUTION:
Do not remove power from the fixture while performing a boot copy.
To accept and store the new boot code:
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Using the left and right arrows on the Center button, scroll to the
TEST OPTIONS MENU
3. Using the left and right arrows on the Center button, scroll to the
the Enter button to select.
4. Use the up and down arrows on the Center button to scroll to the
the Enter button to store the command. The fixture will store the new boot code, then
automatically home.
Display Test
Motor Setup
This option is used when calibrating flag motors in Production Homing, see Production Homing on
page 45.
Encoder Disable
Code Menu
24
TEST OPTIONS
menu turns the lamp
and press the Enter button to select.
ON
OFF
or
.
BOOTDIFF
error.
COPY BOOT
option and press
YES
option and then press
SHOWGUN
®
User Manual