Lamp Menu; Lamp On/Off; Lamp On/Pwr; Lamp On/Dmx - High End Systems TechnoArc User Manual

Lamp Menu

The Lamp menu lets you control lamp striking function.
To enter the Lamp Menu:
1. Press the MODE/ESC button to enter the first level of the menu system. The display will
MODE
/ ESC
show Address and Info as the first two options in the top menu level.
2. Using the
Note: The red star
3. Press the button to select.

Lamp On/Off

This option lets you manually turn the lamp on independant of any other input.
To turn the lamp on manually:
1. Navigate to and select the Lamp menu as shown above. Lamp On/Off is the first option you
will view. Press the
2. Using the
Note: If the lamp is too hot to strike, this option will display ON and as soon
as the lamp cools it will automatically strike.

Lamp On/Pwr

This option automatically turns the lamp on when the fixture is connected to power.
To turn the lamp on when power is applied:
1. Navigate to and select the Lamp menu as shown above.
2. Using the
3. Using the

Lamp On/DMX

This option automatically turns the lamp on when the fixture receives a DMX signal.
To turn the lamp on with DMX:
1. Navigate to and select the Lamp menu as shown above.
2. Using the
3. Using the
TechnoArc User Manual
TM
buttons, scroll to Lamp.
indicates the current menu option.
*
button to select
buttons, scroll to On and press the
buttons, scroll to Lamp On/Pwr and press the
buttons, scroll to On and press the
buttons, scroll to Lamp On/DMX and press the
buttons, scroll to On and press the
button to select.
button to select.
button to select.
button to select.
button to select.
CHAPTER 3
Menu System
27