Edge Frame Profiles
Effect Mode parameter DMX value = 133
This effect contains three modes that modify the Global Image Edge Fade parameters to
frame the global composite image. Modifier 2 and Modifier 3 adjustments vary depending which
of the framing modes is selected with Modifier 1.
NOTE: If the Global Image Edge Fade DMX values are set to Zero, the
Framing output will be unseen in modes 0 and 1.
The images below show examples of the first two framing modes. In the image on the left
Modifier 1 selects the internal profile framing option, with Modifier 2 selecting the frame
pattern.
In the example on the right, Modifier 1 selects the Graphic Object texture framing option, with
Modifier 2 selecting the frame pattern. A Modifier 3 DMX value = 10 designates the Frame
texture as Graphic Object 2's media file content minus any applied effects.
NOTE: Global Image Edge Fade DMX values = 100.
Effect Mode parameter = 133
Modifier 1 parameter DMX = 0
Modifier 2 parameter DMX = 15
Modifier 3 Not Used
Framing Shutter Emulation
When Modifier 1 is set to a DMX value = 2, Modifier para-
meters 2 and 3 are not used. Instead, the four Global Image
Edge Fade parameters control image to emulate framing
shutters. In the example to the right, each Image Edge
Fade parameter has been set to a DMX value = 100.
NOTE: This technique is useful when your are running
Version 1 Protocol. Version 2 Protocol provides a
much better solution for this situation with eight
Framing Shutter channels.
DL.3 Digital Light User Manual
Effect Mode Options Descriptions
Object Effect
Effect Mode parameter = 133
Modifier 1 parameter DMX = 1
Modifier 2 parameter DMX = 251
Modifier 3 parameter DMX = 10
CHAPTER 13
Global Effect
203