Programmed Messages - Samsung iDCS500 User Manual

Dcs (euro) keyset
Hide thumbs Also See for iDCS500:
Table of Contents

Advertisement

Samsung iDCS500

PROGRAMMED MESSAGES

When you plan to be away from your phone for any length of time, you can
leave a programmed station message on your phone's display (e.g. "In a
Meeting"). Display keysets calling you will also see this message. The mes-
sage may also contain instructions for callers to follow. In 'L' version systems
there are 30 possible messages (01–30). In 'M' version systems there are 20
possible messages (01–20). Messages 01–10 are set up by default as fol-
lows (the rest are blank):
01
GIVE ME THE CALL
02
TAKE A MESSAGE
03
ASK THEM TO HOLD
04
SEND TO MY VOICE MAIL
05
TRSF TO MY SECY
06
LEAVE A MESSAGE
07
PAGE ME
08
OUT OF TOWN
09
IN A MEETING
10
I WILL CALL BACK
Each of these default messages and the blank messages can be customised
in programming as required. To see what messages have been set up for
your system:
With the handset on-hook, dial TRSF 115
Use the VOLUME keys to scroll through the programmed message op-
tions.
PROGRAMMED MESSAGE KEYS
n
You may have message ( PMSG) keys programmed on your keyset, each
with a different message code as an extender. If so:
§
Press the PMSG key you require. The message is set and the key will
light red. Press the key again to turn the LED off.
§
Pressing a different PMSG key will turn the previous message off and set
a new message.
DCS (Euro) Keyset User Guide
– 38 –

Advertisement

Table of Contents
loading

Table of Contents