Table of Contents
Advertisement
SET DATE AND TIME DISPLAY
Should it ever become necessary to correct the date and time displayed on all
of the keysets, do so as soon as you notice that they are incorrect. Automatic
Night Service will not work correctly and SMDR records will be of no value when
the date and time are not correct.
The display format is the following:
W (Day of the week): Enter 0 for Sunday and 6 for Saturday.
MM (Month): Enter 01 for January and 12 for December.
DD (Day of the month): Enter a number in the range of 01
YY (Year): Enter the last two digits of the year.
HH (Hours): Use the 24 hour clock and enter a number in the range of 00
MM (Minutes): Enter a number in the range of 00
Failure to enter the time using the 24 hour clock will cause the date to change at
12:00
Open customer programming and follow the instructions below.
P .M.
ACTION
1. Press TRSF and then dial 505
Display shows
2. Enter the new time and date using
the above format
3. Verify the time and date and reenter
them if necessary
4. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
If you have entered invalid data, you will receive an [ INVALID ENTRY ] mes-
sage for three seconds. Reenter the correct date and time. If the information you
entered is incorrect, repeat the procedure.
10
–
31.
–
24.
–
59.
DISPLAY
OLD:6010184:0047
NEW:WMMDDYY:HHMM
OLD:6010184:0047
NEW:3020994:1445
OLD:3020994:1445
NEW:WMMDDYY:HHMM
RESET STATION PASSCODES TO
DEFAULT
Individual keyset users can set or change their own individual passcodes. These
passcodes are used to lock and unlock keysets, override toll restriction and
access the DISA feature. At times, it may be necessary for the system admin-
istrator to reset a station's passcode to default "1234." This program cannot be
used to display passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN - Select the extension number.
HOLD - Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 101
Display shows
2. Dial the station number OR use the
UP and DOWN keys to scroll through
the keyset numbers and press the
right soft key to move the cursor right
3. Press HOLD to reset the passcode
4. Press the right soft key to return to
step 2 OR press TRSF to store and exit
programming OR press SPK to
store and advance to the next program
DEFAULT DATA: ALL STATION PASSCODES = 1234
DISPLAY
[201] PASSCODE
PASSCODE:✱✱✱✱
[205] PASSCODE
PASSCODE:✱✱✱✱
[205] PASSCODE
PASSCODE : 1234
11
Advertisement
Table of Contents
