System Access Codes - Samsung iDCS500 User Manual

Samsung iDCS500
2. You select features in a menu using the soft keys. If there are more than
three features in a menu—as indicated by the symbol " → " displayed as
the last character on the lower line of the display—press the SCROLL
key to display these further options.
Be aware that the menus presented to you will change depending on the
state of your keyphone. In the idle state (on-hook), you see the menus
above. While making or answering calls, other menus are displayed. When a
feature is described in this guide, you are shown how to use the menus if you
do not have the required key programmed on your keyset.

SYSTEM ACCESS CODES

n
As an alternative to programming the phone keys, your system is configured
with default system access codes for using the various features described in
this guide. These codes are printed at the end of the guide for quick refer-
ence. However, your system may have been set up to use a different set of
codes. Therefore, if your system does not work as described in this guide,
see your system administrator for advice.
DCS (Euro) Keyset User Guide
– 5 –