Replacing The Cursor; Replacing The Cutter Holder, Cutter Spring, Cutter Cap, Solenoid Assembly And Solenoid Spring - MUTOH spitfire 90 Maintenance Manual

4.7. REPLACING THE CURSOR

4.7.1. Replacing the cutter holder, cutter spring, cutter cap, solenoid
assembly and solenoid spring
(1) Replacing the cutter spring
Step 1 :
Open the front cover.
Step 2 :
Remove the cutter blade from the cutter holder.
Step 3 :
Remove the cutter spring from the cutter holder.
1 = Cutter spring
Step 4 :
Replace the cutter spring.
Step 5 :
Reinstall all parts in the opposite order of the removal procedure.
(2) Replacing the cutter holder, cutter cap, solenoid assembly and solenoid spring
Notes :
Remove following covers before replacing the cutter holder, cutter cap, solenoid
assembly, and solenoid spring.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Y rail cover: refer to "Removing the Y rail cover"
Head cover: refer to "Removing the head cover"
2 = Cutter holder
103
Spitfire – Maintenance Manual
AP-74096, Rev. 1.0, 09/06/05