User Interface - Agilent Technologies 1260 Infinity II User Manual

Operation

User Interface

The Multi-Angle Light Scattering Detector is fully controlled via a user interface
which is embedded into the Agilent WinGPC Software.
The user interface allows configuration of the detector settings as well as manual
control of functions (Laser, Cell Heater On / Off, Error Signal), data acquisition and
data evaluation.
To add the detector to the method, in the Method window of the WinGPC Software,
navigate to the detector Agilent 1260 MALS in the resource tree under
Lightscattering. Drag and drop the detector in the Detector section of the method
window. The MALS detector must always be the last detector added to the method.
To edit the detector properties (for example, which angles are automatically
displayed), right-click on the detector in the resource tree and select Edit from the
context menu.
Figure 6 Properties window
Multi-Angle Light Scattering Detector User Manual 37