Table of Contents
Advertisement
Figure 2–24 Power Supply
Illustration Legend:
1 - Power Supply Indicators
2 - Power Supply Latch
Figure 2–25 Tape Drive Tray
Illustration Legend:
1 - Drive Indicators
2 - Port Indicators (HP drives only)
3 - Encryption Indicators
4 - Thumbscrew (One on Each Side of the Tray)
Remove the Power Supply Filler
Hook your finger in the hole of the power supply filler.
1.
Pull the filler from the power supply slot and set it aside.
2.
Install Power Supplies and Tape Drives
Installing the Library 2-25
Advertisement
Table of Contents
