Table of Contents
Advertisement
Figure 2–14 Expansion Module Installation
Illustration Legend:
1 - First U
2 - Second U
3 - Module Flange
4 - Module Engagement
5 - Clip Nut Location (Second Hole of the Second U)
Prepare the Expansion Module by Removing the Cartridge Magazines
Remove the expansion module from the shipping container (see
1.
Acclimate the Library"
Reach behind the front panel and lift the latch to release the magazine (see
2.
Figure
The expansion module is open at the top, and the latches are located behind the
front face of the module.
Remove the cartridge magazines from the module you are installing.
3.
on page 2-4).
2–15).
You can also release the magazine with the hex tool.
Tip:
Install the Expansion Module
"Unpack and
Installing the Library 2-17
Advertisement
Table of Contents
