Table of Contents
Advertisement
Configure Email Notifications
Enable or Disable Email Notifications
From the remote interface, select Email Alerts in the left menu.
1.
Click Configure
2.
Set Email Alerts to On (Enabled) or Off (Disabled).
3.
If enabling email alerts, enter the following information:
4.
■
■
■
■
■
■
Configure Email Recipients
From the remote interface, select Email Alerts in the left menu.
1.
Click Add Recipient
2.
Email Recipient
■
Send a Test Email Alert
From the remote interface, select Email Alerts in the left menu.
1.
Select a recipient, and then click Send Test Email
2.
7-6 StorageTek SL150 Modular Tape Library Guide
.
SMTP Host Address — IP address of the Simple Mail Transport Protocol
server that will handle outgoing mail for the library.
SMTP Port — The network port used by your SMTP server. The default is 25,
but you may choose any non-reserved port. Reserved ports include 0, 22, 80,
67, 68, 123, 514, 546, 547, 161, 162, and all ports in the range 33200-33500.
From Name — The name that should appear in the sender field of the email.
The default is "Library Alert".
From Email — The email address that should appear in the sender field of the
email.
Secure Connection — Select TLS unless the network does not support TLS.
SSL is an older protocol that offers less protection. None provides no
cryptographic protection.
If using TLS or SSL, enter a user name and password.
, or select a recipient and click Edit Recipient
.
Alert on Health and/or Change — When selected, recipient will be notified
when the library health changes.
or Delete
.
Advertisement
Table of Contents
